Table of Contents
Advertisement
G330 Resource CD build 300 (or later).
Software
MegaRAID Storage
Manager
Configuring LSI MegaRAID SAS 8204ELP
Please refer to the Appendix D. for the LSI MegaRAID SAS 8204ELP
configuration.
Installation Tips
Since Red Hat Enterprise Linux 4.0 Update 3 cannot recognize the LSI
1.
MegaRAID SAS 8204ELP, you need to make a driver diskette from the
Resource CD first before the installation.
Type linux dd when the prompt boot: appears at the start.
2.
Follow the instruction to load MegaRAID SAS 8204ELP driver from the
3.
driver diskette from floppy (fd0).
At Package Defaults page, select Customize the set of packages to be
4.
installed. And select Development Tools under Development in the
Package Group Selection.
Follow the normal procedure to finish the installation.
5.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet Driver installation is the same as onboard LSI SATA RAID
enabled. Please refer to the Red Hat Enterprise Linux 4 Update 3 (with onboard
LSI SATA RAID) Gigabit Ethernet Driver Installation section.
MegaRAID Storage Manager Installation
1.
You can find the MegaRAID Storage Manager in G330 Resource CD build
300. Please refer to Directory on Resource CD in Software Required
section for the utility and copy it from the G330 Resource CD build 300 to
HDD first.
# mount /media/cdrom
# cp –R /media/cdrom/APP/G330/sas/8204ELP/Linux/. /tmp
2.
Install MegaRAID Storage Manager
# cd /tmp/
# ./install.sh
3.
Type y to accept the license agreement and select 3 for StandAlone
installation.
4.
To start MegaRAID Storage Manager, click on Applications and select
System Tools -> MegaRAID Storage Manager StartupUI.
35
Version
Directory on Resource CD
2.07-00
\app\g330\sas\8204ELP\Linux\
Altos G330 Installation Configuration Guide
Advertisement
Table of Contents
