Table of Contents
Advertisement
Altos G330 Installation Configuration Guide
Follow the instruction to load Adaptec SAS 44300 driver from the driver
3.
diskette from floppy (fd0).
At Package Defaults page, select Customize the set of packages to be
4.
installed. And select Development Tools under Development in the
Package Group Selection.
Follow the normal procedure to finish the installation.
5.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet Driver installation is the same as onboard LSI SATA RAID
enabled. Please refer to the Red Hat Enterprise Linux 4 Update 3 (with onboard
LSI SATA RAID) Gigabit Ethernet Driver Installation section.
Adaptec Storage Manager Installation
1.
Insert the G330 Resource CD and copy the utility StorMan-4.30.i386.rpm
from the folder /APP/G330SAS/Adaptec/Linux on the CD to HDD.
2.
Install StorMan-4.30.i386.rpm.
# rpm –ivh StorMan-4.30.i386.rpm
3.
Launch the Adaptec Storage Manager
# /usr/StorMan/StorMan.sh
Red Hat Enterprise Linux 4.0 Update 3 (with LSI MegaRAID SAS
8204ELP)
Below information describes how to manually install Red Hat Enterprise Linux
4.0 update 3 on Altos G330 with LSI MegaRAID SAS 8204ELP.
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 3 Installation, the following device
drivers are required.
Device
Onboard ATI
ES1000
Onboard Intel 3000
Chipset
LSI MegaRAID SAS
8204ELP
Onboard Intel
82573E Gigabit
Ethernet
Onboard USB 2.0
Software Required
The management utility of LSI MegaRAID SAS 8204ELP can be found in the
34
Version
Directory on Resource CD
N/A
OS built-in
N/A
No Driver
07.15.0209.20
\app\g330\sas\8204ELP\Linux\
07
7.3.15-NAPI
\Disk\G330\NIC\Intel\pro1000.lx
N/A
OS built-in
Advertisement
Table of Contents
