Initial Raid Volume; Assigning A Hot Spare Disk; Save And Exit Embedded Raid Configuration Utility - Acer G330 - Altos - 1 GB RAM Configuration Manual

Altos G330 Installation Configuration Guide
Press spacebar to select the array and press <F10> to configure the logical
6.
drive
The default RAID level for 2 disk drives is RAID1. Just select Accept to use
7.
the default setting and press <Enter> to return to the
MENU.
Press <Enter> to end the array configuration.
8.
Select YES to Save Configuration and press any key to return to the
9.
Configure menu.

Initial RAID Volume

Press <Esc> to return to the Management Menu.
1.
Select Initialize from Management menu. All logical drives should be
2.
listed under Logical Drives.
Press <Spacebar> to select drives for initialization. The selected drive will
3.
be shown in yellow.
After selecting the drives, press <F10> and select YES to start the
4.
initialization process.
When initialization is complete, press any key to continue.
5.
6. Press <Esc> to return to the Management Menu.

Assigning a Hot Spare Disk

Select Objects from Management menu.
1.
Select Physical Drive from Objects. All of the HDDs will be listed.
2.
Select a drive marked as READY and press Enter.
3.
Select Make Hot Spare and press Enter.
4.
Select Yes then you will see the HDD is changed from READY to HOTSP.
5.
Press <ESC> to return to the Management Menu.
6.

Save and Exit Embedded RAID Configuration Utility

When RAID configuration, initialization and assigning hot spare is
1.
complete, press <Esc> in the Management Menu and select YES to exit
the Embedded RAID Configuration Utility.
Press <Ctrl> + <Alt> + <Del> to reboot the server.
2.
Now you can start to install OS.
3.
82
ARRAY SELECTION