Table of Contents
Advertisement
Onboard SATA
RAID Monitor
Utility
Configuring onboard LSI SATA RAID
Please refer to the Appendix B. for the onboard LSI SATA RAID configuration.
Installation Tips
Since SUSE Linux Enterprise Server 9 EM64T Service Pack 3 cannot
1.
recognize the onboard LSI SATA RAID, you need to make a driver diskette
from the G330 Resource CD build 100 first before the installation.
Boot the system form SUSE Linux Enterprise Server 9 EM64T Service Pack3
2.
bootable CD.
When you see the boot menu on the screen, press F6, select Installation
3.
then press Enter to continue.
Follow the instruction to load the onboard LSI SATA RAID driver from the
4.
driver diskette.
After loading the driver, select Back to return the installation procedure.
5.
Follow the instruction to change the CD to SUSE Linux Enterprise Server 9
6.
EM64T CD #1.
Continue to follow the instructions to the Installation Settings
7.
At the Installation settings, select the Software and click on Detailed
8.
selection.
Check C/C++ Compiler and Tools in the left window to add C/C++ compiler
9.
tools.
Select Various Linux Tools in the left window and check kernel-source in
10.
the right window to add kernel-source.
After you add the kernel-source and C/C++ Compiler and Tools, please
11.
click on Accept and follow the instruction to complete the installation.
Gigabit Ethernet Driver Installation
The SUSE Linux Enterprise Linux 9 SP3 EM64T could detect the onboard Intel
82573E automatically. We still recommend replacing the driver with the one in
G330 Resource CD.
Remove the module e1000
1.
# rmmod e1000
Make the driver diskette for G330 Resource CD.
5.
Copy driver from floppy to hard disk
6.
# mount /media/floppy
63
1.11.0
\APP\G330\SATARAID\Monitor\linux\
Altos G330 Installation Configuration Guide
Advertisement
Table of Contents
