Table of Contents
Advertisement
6.
Restart the network interface.
# service network start
Onboard SATA RAID Utility Setup
1.
Copy the utility Spy.i386.rpm from the G330 Resource CD to HDD.
2.
Install the Spy.i386.rpm
# rpm –ivh Spy.i386.rpm
Red Hat Enterprise Linux 4.0 Update 3 (with Adaptec SAS 44300
HostRAID)
Below information describes how to manually install Red Hat Enterprise Linux
4.0 update 3 on Altos G330 with Adaptec SAS 44300 HostRAID.
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 3 Installation, the following device
drivers are required.
Device
Onboard ATI
ES1000
Onboard Intel 3000
Chipset
Adaptec SAS 44300
Onboard Intel
82573E Gigabit
Ethernet
Onboard USB 2.0
Software Required
The management utility of Adaptec SAS 44300 HostRAID can be found in the
G330 Resource CD build 100 (or later).
Software
Adaptec Storage
Manager
Configuring Adaptec SAS 44300 HostRAID
Please refer to the Appendix C. for the Adaptec SAS 44300 HostRAID
configuration.
Installation Tips
Since Red Hat Enterprise Linux 4.0 Update 3 cannot recognize the
1.
Adaptec SAS 44300, you need to make a driver diskette from the Resource
CD first before the installation.
Type linux dd when the prompt boot: appears at the start.
2.
33
Version
Directory on Resource CD
N/A
OS built-in
N/A
No Driver
1.2.5918.0
\Disk\G330\SAS\Adaptec\44330.rl
7.2.7-NAPI
\Disk\G330\NIC\Intel\pro1000.lx
N/A
OS built-in
Version
Directory on Resource CD
4.30.01(16042
\APP\G330\SAS\Adaptec\Linux\
)
Altos G330 Installation Configuration Guide
Advertisement
Table of Contents
