Table of Contents
Advertisement
Altos G330 Installation Configuration Guide
NetWare 6.5 Support Pack 5 Installation (with Adaptec SAS
44300 HostRAID)
Below information describes how to manually install NetWare 6.5 (Support
Pack 5 overlay CD) on Altos G330 with Adaptec SAS 44300 HostRAID.
Drivers Required
For NetWare 6.5 SP5 Installation, the following device drivers are required.
Device
Onboard ATI
ES1000
Onboard Intel 3000
Chipset
Adaptec SAS 44300
Onboard Intel
82573E Gigabit
Ethernet
Onboard USB 2.0
Software Required
The management utility of Adaptec SAS 44300 can be found in the G330
Resource CD build 100 (or later).
Software
Adaptec Storage
Manager
Patch Required
For NetWare 6.5 SP5 installation, the following patch is recommended.
Patch
ACPI PSM module
update
Configuring Adaptec SAS 44300 HostRAID
Please refer to the Appendix C. for the Adaptec SAS 44300 HostRAID
configuration.
Installation Tips
1.
Make the driver disks for Adaptec SAS 44300 and 82573E Gigabit Ethernet
from Resource CD.
2.
Boot the system from the NetWare 6.5 SP5 OS CD.
3.
At Welcome to the NetWare 6.5 server installation page, select Manual to
install.
4.
At Prepare boot partition page, create one 500 MB DOS partition.
68
Version
Directory on Resource CD
N/A
OS built-in
N/A
No Driver
1.20
\Disk\G330\SAS\Adaptec\44330.nw
10.21.01
\Disk\G330\NIC\Intel\pro1000.nw
N/A
OS built-in
Version
Directory on Resource CD
4.30.01(1604
\APP\G330\sas\Adaptec\NetWare\
2)
Where to download
http://support.novell.com/servlet/downloadfile?file=/un
s/nsd/psm7.exe/
Advertisement
Table of Contents
