Table of Contents
Advertisement
Altos G330 Installation Configuration Guide
SUSE Linux Enterprise Server 9 EM64T Service Pack 3 Installation
(with LSI MegaRAID SAS 8204ELP)
Below information describes how to manually install SUSE Linux Enterprise
Server 9 EM64T Service Pack 3 on Altos G330 with add-on LSI MegaRAID SAS
8204ELP.
Drivers Required
For SUSE Linux Enterprise Server 9 EM64T Service Pack 3 Installation, the
following device drivers are required.
Device
Onboard ATI
ES1000
Onboard Intel 3000
Chipset
LSI MegaRAID SAS
8204ELP
Onboard Intel
82573E Gigabit
Ethernet
Onboard USB 2.0
Software Required
The management utility of LSI MegaRAID SAS 8204ELP can be found in the
G330 Resource CD build 300 (or later).
Software
MegaRAID Storage
Manager
Configuring LSI MegaRAID SAS 8204ELP
Please refer to the Appendix D. for the LSI MegaRAID SAS 8204ELP
configuration.
Installation Tips
NOTE. The SuSE Linux Enterprise Server 9 EM64T Service Pack 3 CANNOT detect
the floppy with LSI MegaRAID SAS 8204ELP installed. You need an USB floppy
during the installation to load the driver for MegaRAID SAS 8204ELP.
Since SUSE Linux Enterprise Server 9 EM64T Service Pack 3 cannot
1.
recognize the LSI MegaRAID SAS 8204ELP, you need to make a driver
diskette from the G330 Resource CD build 300 first before the installation.
Please connect the USB floppy to the G330 before you start to install the
2.
SUSE Linux Enterprise Server 9 EM64T Service Pack 3.
Boot the system form SUSE Linux Enterprise Server 9 EM64T Service Pack3
3.
bootable CD.
66
Version
Directory on Resource CD
N/A
OS built-in
N/A
No Driver
07.15.0209.20
\Disk\g330\sas\8204ELP\x64\sles9sp3\
07
7.3.15-NAPI
\Disk\G330\NIC\Intel\pro1000.lx
N/A
OS built-in
Version
Directory on Resource CD
2.07-00
\app\g330\sas\8204ELP\Linux\
Advertisement
Table of Contents
