Table of Contents
Advertisement
Altos G330 Installation Configuration Guide
Onboard LSI SATA
RAID
Onboard Intel
82573E Gigabit
Ethernet
Onboard USB 2.0
Software Required
The management utility of onboard LSI SATA RAID will be included in the
EasyBUILD 7.1 build 600 (or later).
Software
Onboard LSI SATA
RAID monitor utility
Patch Required
NOTE. The ACPI PSM update patch is required for NetWare 6.5 installation with
Support Pack 5 overlay CD. You MUST apply the update before you start the OS
installation.
Patch
ACPI PSM module
update
Configuring onboard LSI SATA RAID
Please refer to the Appendix B. for the onboard LSI SATA RAID configuration.
Installation Tips
NOTE. The ACPI PSM update patch is required for NetWare 6.5 installation with
Support Pack 5 overlay CD. You MUST apply the update before you start the OS
installation.
1.
Please create a bootable DOS partition on the RAID volume.
2.
Create the \nwupdate\drivers directory in the DOS partition.
3.
Copy the files in \startup directory in the ACPI PSM module update
package to \nwupdate\drivers directory.
4.
Download and make the driver disks for onboard LSI SATA RAID and
82573E Gigabit Ethernet.
5.
Boot the system from the NetWare 6.5 Support Pack 5 OS CD.
6.
At Welcome to the NetWare 6.5 server installation page, select Manual to
76
6.31
The driver will be included in
EasyBUILD 7.1 build 600 or later. You
can find the driver on GCSD website,
too.
http://csd.acer.com.tw
10.21.01
\Disk\G330\NIC\Intel\pro1000.nw
N/A
OS built-in
Version
Directory on EasyBUILD
7.29
The utility will be included in the
EasyBUILD 7.1 build 600 or later. You
can find the utility on GCSD website,
too.
http://csd.acer.com.tw
Where to download
http://support.novell.com/servlet/downloadfile?file=/un
s/nsd/psm7.exe/
Advertisement
Table of Contents
