Drivers Required
For SUSE Linux Enterprise Server 10 Installation, the following device drivers are
required. These drivers can be found in EasyBUILD 7.1 build 600 (or later)
Device
Onboard ATI
ES1000
Onboard Intel 3000
Chipset
Onboard LSI SATA
RAID
Onboard Intel
82573E Gigabit
Ethernet
Onboard USB 2.0
Software Required
The management utility of onboard LSI SATA RAID can be found in the
EasyBUILD 7.1 build 600(or later).
Software
Onboard SATA
RAID Monitor
Utility
Configuring onboard LSI SATA RAID
Please refer to the Appendix B. for the onboard LSI SATA RAID configuration.
Installation Tips
Since SUSE Linux Enterprise Server 10 cannot recognize the onboard LSI
1.
SATA RAID, you need to make a driver diskette from the EasyBUILD7.1
build 600 (or later) first before the installation.
Boot the system form SUSE Linux Enterprise Server 10 bootable CD.
2.
When you see the boot menu on the screen, press F5 and select Yes.
3.
Press Enter to continue the installation.
4.
Insert the driver disk to the floppy, select fd0: Floppy and OK to load the
5.
onboard LSI SATA RAID driver from the driver diskette.
After loading the driver, select OK and Back to return the installation.
6.
Follow the instructions to the Installation Settings
7.
At the Installation settings, select the Software.
8.
Check C/C++ Compiler and Tools under Development to add C/C++
9.
compiler tools.
Click on Details, change Filter from Patterns to Package Groups.
10.
41
Version
Directory on EasyBUILD
N/A
OS built-in
N/A
No Driver
5.09c
\Disk\G330\raid\LSI\sles10
7.3.15-NAPI
\Disk\G330\NIC\Intel\pro1000.lx
N/A
OS built-in
Version
Directory on EasyBUILD
1.11.0
\APP\G330\SATARAID\Monitor\linux\
Altos G330 Installation Configuration Guide