Table of Contents
Advertisement
Altos G330 Installation Configuration Guide
twice, insert the driver disk for onboard LSI SATA RAID into floppy and
press Enter.
8.
After the driver is successfully loaded, you would see the devices listed as
below. Then, please select Return to driver summary.
Add, edit, or delete storage drivers. Each
controller/adapter requires a driver.
Driver name
Device Name
------------
---------------------------------------
IDEATA.HAM
Standard ATA/IDE/ATAPI Adapter
MEGARIDE.HAM
Intel Embedded Server RAID Technology
9.
You would see the following message. Please select Continue to continue
the installation.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types
-------------------------
HotPlug Support Module:
Storage adapters:
10.
NetWare 6.5 Support Pack 6 can detect the onboard Intel 82573E but we
still replace the driver with the one in G330 Resource CD. When you see
the following screen, please select Modify. Then, move the cursor to
Network boards and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types
-------------------------
Network boards:
NetWare Loadable Modules:
11.
Please press DELETE key to remove the E1000E drivers.
Add, edit, or delet network board drivers. Each
network board requires a driver
Driver name
Device Name
------------
----------------------------------------------
E1000E.LAN
Intel Intel(R) PRO/1000 PCI-E Network Connection D
12.
Please press INSERT key twice, insert the driver disk for onboard Intel
74
Driver names
----------------------------
(optional)
IDEATA,MEGARIDE
Driver names
----------------------------
E1000E
(optional)
Stat
----
Stat
----
Advertisement
Table of Contents
