Table of Contents
Advertisement
Please insert the G330 Resource CD into optical drive.
2.
Select Driver, expand Drivers -> Altos G330 -> Onboard Device -> Chipset,
3.
select Windows Server 2003 x64 and run Setup.
Follow the instruction to install the chipset driver and reboot the server
4.
after the driver is installed.
VGA Driver Installation
Windows will treat onboard VGA as Standard VGA device. You can find
1.
the ATI ES1000 driver in G330 Resource CD. Please insert the G330
Resource CD into the optical drive.
Select Driver, Expand Drivers -> Altos G330 -> Graphics adapters -> ATI
2.
ES1000, select Windows Server 2003 x64 and click on Setup.
Follow the instruction to install the chipset driver and reboot the server
3.
after the driver is installed.
After installing the driver, you would see ATI ES1000 listed in Display
4.
adapters.
Gigabit Ethernet Driver Installation
The Ethernet Controller listed under Other devices is onboard Intel
1.
82573E Gigabit Ethernet Controller.
Right-click on the Ethernet Controller and select Update Driver.
2.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
7
Altos G330 Installation Configuration Guide
Advertisement
Table of Contents
