Table of Contents
Advertisement
System Utilities
BIOS Setup Utility
The BIOS Utility is a hardware configuration program built into your system's Basic Input/Output System
(BIOS).
Since most systems are already properly configured and optimized, there is no need to run this utility.
However, if you encounter configuration problems and get the "Run Setup" message, you will need to run this
utility.
Before you run Setup, make sure that you have saved all open files. The system reboots immediately after
you exit Setup.
NOTE: If you repeatedly receive Run Setup messages, the battery may be bad. In this case, the system
cannot retain configuration values in CMOS. Ask a qualified technician for assistance.
Chapter 2
Chapter 2
13
Advertisement
Table of Contents
