AIS Calibrate Conference Manual page 25

Calibrate Conference Tables
Infeed 10' Cord
Power Unit
Female-Female Cable
T-Jumper Kit
www.ais-inc.com
5 Base Table – 5 Power Units
Hardwired
C-CCTINSTALL Revision 03.19.2025
Hardwired Power Units
Infeed must be at one
end of the power run.
Floor core must be
located within 10' of
end power unit.
Otherwise, use a
Hardwired T Jumper kit.
Infeed
10' Cord
If floor core is not located
within 10' of the last
power unit, use a
Hardwired T Jumper Kit.
5 Base Table – 5 Power Units
with Hardwired T Jumper Kit
25