AIS Calibrate Conference Manual page 12

Calibrate Conference Tables
•
First install 2 screws to one worksurface
•
Then, align worksurfaces and install 2 screws off center
from flat plate hole, (side of hole farthest away from
seam). This will insure that the flat plate will create a tight
seam between 2 worksurfaces.
www.ais-inc.com
Flat Plate
3 places per seam
#9 x 7/8 long
Flat head wood screws
#2 Phillips drive
Leave 4 holes empty for
future or adjustments
Tight seam with
Quick Grips
C-CCTINSTALL Revision 03.19.2025
Flat Plate
3"
3"
OFFSET SCREW
12