AIS Calibrate Conference Manual page 14

Calibrate Conference Tables
1. Install the Power Unit into the Box using (2)
M3 x 12mm flat head screws.
2. Install the Box into the worksurface.
www.ais-inc.com
3a. Secure the Box to the worksurface using
(4) #6 x 1" long flat head wood screw.
3b. Break tabs off box.
4. Install Cover. Confirm preferred orientation with client
prior to installing.
5. Secure Cover using (2) #6 x 5/8" long
flat head wood screws
C-CCTINSTALL Revision 03.19.2025
Domino Power Installation
Break tabs
14