AIS Calibrate Conference Manual page 23

Calibrate Conference Tables
4 Base Table – 4 Power Units
Hardwired
Infeed 10' Cord
www.ais-inc.com
Infeed must be at one end
of the power run. Floor
core must be located
within 10' of end power
unit. Otherwise, use a
Hardwired T Jumper kit.
If floor core is not located
within 10' of the last
power unit, use a
Hardwired T Jumper Kit.
Power Unit
Female-Female
Cable
C-CCTINSTALL Revision 03.19.2025
Hardwired Power Units
4 Base Table – 4 Power Units
with Hardwired T Jumper Kit
T-Jumper Kit
Infeed
10' Cord
23