Labconco Protector 3944300 User Manual page 9

Chapter 2: Prerequisites
Electrical Requirements
Standard duplex electrical receptacles should be nearby for connecting
the Demonstration Hood, FilterMate Portable Exhauster, an airflow
monitor, accessory Fluorescent Light or other equipment. For your
convenience both the accessory FilterMate and accessory fluorescent
light kit have auxiliary outlet receptacles. It is required that the airflow
monitor be connected directly to the auxiliary switched outlet on the rear of
the FilterMate so the airflow monitor is ON when the blower is ON. The
FilterMate auxiliary switched outlet is rated for 8 amps.
For other blower exhaust systems, it is recommended that the airflow
monitor be switched by the same circuit as the exhaust blower. If this is
not possible, then the airflow monitor may be connected to the switched
auxiliary outlet on the accessory fluorescent light kit. The fluorescent light
kit auxiliary outlet can be used for any accessory under 8 amps.
Space Requirements
The dimensions for the different models are shown in Appendix B:
Dimensions.
Product Service 1-800-522-7658 5