04/ Connecting Power And Data; Connecting Power - ACME STAGE PAR 100 IP Instruction Manual

REV F 02/07/2025

04/ Connecting Power and Data

4.1 Connecting Power

This fixture can operate on any 100-240Vac; 50/60Hz AC mains power supply.
The maximum power consumption is 108W.
The fixture must be grounded/earthed and able to be isolated from AC power. The AC power
supply must incorporate a fuse or circuit breaker for fault protection.
Wiring and connection work must be carried out by a qualified electrician.
The power cable color coding is given in the figure below:
CAUTION!
DO NOT CONNECT THE FIXTURE TO AN ELECTRICAL DIMMER SYSTEM AS DOING SO
MAY CAUSE DAMAGE.
- 7 -