ACME STAGE PAR 100 IP Instruction Manual page 12

Freq (Frequency)
Select Freq, press ENTER.
Use UP/DOWN button to select 900Hz, 1000Hz, 1100Hz, 1200Hz,
1300Hz, 1400Hz, 1500Hz, 2500Hz, 4000Hz, 5000Hz, 6000Hz, 10KHz,
15KHz, 20KHz or 25KHz, confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Disp (Display Invert)
Select Disp, press ENTER.
The display rotates by 180°.
To exit the menu, press MENU, or wait 30 seconds.
Mand (Manual Mode)
Select Mand, press ENTER.
Use UP/DOWN button to select the channel for which the manual test
is to be performed, confirm your selection with ENTER.
Use UP/DOWN button to select a value, confirm your selection with
ENTER.
To exit the menu, press MENU.
Test
Select Test, press ENTER.
The device immediately performs an automatic self-test.
To end the automatic self-test and exit the menu, press MENU, or wait
30 seconds.
Temp (Temperature)
Select Temp, press ENTER.
The device temperature is displayed.
To exit the menu, press MENU, or wait 30 seconds.
Fhrs (Fixture Hours)
Select Fhrs, press ENTER.
The operating hours is displayed.
To exit the menu, press MENU, or wait 30 seconds.
- 11 -
REV F 02/07/2025