Prepare Window For Installation; Prepare Window With Storm Window Or Other Obstruction; Position Air Conditioner - Whirlpool W7WCC065XB Use And Care Manual

2. Slide the side curtain down the track until the curtain is
aligned with the top and bottom of the air conditioner cabinet.
3. Slide the side curtain frame into the top channel on the top of
the air conditioner and the track on the bottom of the air
conditioner.
4. Repeat the previous steps for the left-hand side curtain and
frame.

Prepare Window for Installation

1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
A
B
A. Width of window opening
B. Center line
3. Attach the foam seal with adhesive strip to the bottom of the
upper window.
Prepare Window with Storm Window or Other
Obstruction
1. Follow the steps in "Prepare Window for Installation."
2. If possible, remove the storm window frame or other
obstruction.
3. If storm window frame or other obstruction cannot be
removed, attach a piece of wood across windowsill with the
thickness necessary for proper pitch of the air conditioner to
the outside to drain condensation from the unit.
NOTE: Check that the drain holes or slots in the storm
window frame are not caulked or painted closed.
Accumulated rainwater or condensation must be allowed to
drain away.
1 "
Min.
A
B
C
A. Piece of wood
B. Windowsill
C. Indoors

Position Air Conditioner

WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
NOTES:
Handle the air conditioner gently.
Be sure your air conditioner does not fall out of the opening
during installation or removal.
"
Min.
E
D
D. Outdoors
E. Storm window frame or
other obstruction
7