HMS Intesis DA70A0G1V5A5N040 Manual page 20

Intesis MAPS Configuration and Monitoring Tool
8.2.2. Create a New Project from a Template
1. Open Intesis MAPS.
2. Click Create New Project in the Getting started menu on the left.
You can create a project from scratch using a template. To find the appropriate template, filter the search
by:
• Clicking on the protocol logos.
• Typing the order code in the Order Code field.
NOTE
The order code is printed on the silver label placed on the gateway's right side.
• Looking for it on the list.
3. Select the desired template.
4. Click Next or double-click the template on the list.
NOTE
Templates are just a starting point for your integration. Depending on the type of integration, you
may have to modify some parameters.
IMPORTANT
Don't forget to save your project on your computer before exiting Intesis MAPS. To do so, go to
Project → Save or Save As. Later on, you can load the project to Intesis MAPS and continue with the
configuration.
USER MANUAL Version 1.0.2
Figure 3. Three possibilities for the template selection
M-BUS to Modbus TCP Server Gateway
Page 17 of 22