Advertisement
M-BUS to Modbus TCP Server Gateway
DIN rail mounting
Keep the rear panel clip in its original position.
1.
Fit the gateway's top-side clip in the upper edge of the DIN rail.
2.
Press the low side of the gateway gently to lock it in the DIN rail.
3.
Make sure the gateway is firmly fixed.
NOTE
For some DIN rails, to complete step 2, you may need a small screwdriver or similar to pull the
bottom clip down.
Page 8 of 22
Mounting
USER MANUAL Version 1.0.2
Advertisement
Need help?
Do you have a question about the Intesis DA70A0G1V5A5N040 and is the answer not in the manual?
Questions and answers