HMS Intesis DA70A0G1V5A5N040 Manual page 24

Intesis MAPS Configuration and Monitoring Tool
8.2.8. Diagnostic Tab
IMPORTANT
Connection with the gateway is required to use the diagnostic tools.
Figure 8. Diagnostic tab window. Find the ToolBox between the upper tabs bar and the Console view. Below it,
from left to right: Console viewer, Protocol viewers (one above the other), and the Signals viewer
This section has two main parts:
ToolBox
Use the tools section to:
• Check the current hardware status of the gateway.
• Save communication logs to a ZIP file for diagnostic purposes.
• Get information on the gateway.
• Reset the gateway.
Viewers
Intesis MAPS provides several viewers:
• A generic console viewer for general information about communications and the gateway status.
• A viewer for both protocols to check their current status.
• A signals viewer to simulate the BMS behavior or check the system's current values.
USER MANUAL Version 1.0.2
M-BUS to Modbus TCP Server Gateway
Page 21 of 22