Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Icon Process Controls Manuals
  4. Measuring Instruments
  5. Truflo TKS Series
  6. Quick start manual

Icon Process Controls Truflo TKS Series Quick Start Manual

In-line paddle wheel flow meter sensor
Hide thumbs

Advertisement

Quick Links

Download this manual
Truflo
— TKS | TK3S Series
®
In-Line Paddle Wheel Flow Meter Sensor
Read the user's manual carefully before starting to use the unit.
Producer reserves the right to implement changes without prior notice.
24-0564
© Icon Process Controls Ltd.
Quick Start Manual
1
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Truflo TKS Series and is the answer not in the manual?

Questions and answers

Related Manuals for Icon Process Controls Truflo TKS Series

Summary of Contents for Icon Process Controls Truflo TKS Series

  • Page 1 — TKS | TK3S Series ® In-Line Paddle Wheel Flow Meter Sensor Quick Start Manual Read the user's manual carefully before starting to use the unit. Producer reserves the right to implement changes without prior notice. 24-0564 © Icon Process Controls Ltd.

  • Page 2: Safety Information

    10% Particle Size - Not to Exceed .5mm Cross Section or Length. Please do not flush the pipe after the Flow Meter is installed with compressed air this may damage the ceramic shaft and will void warranty. 24-0564 © Icon Process Controls Ltd.

  • Page 3: Product Description

    ShearPro Through-Pin Design ® vs. Flat Paddle Eliminates Finger Spread No Lost Paddles Increased Temp. Rating 360° Housing Protects Rotor Finger Spread = LOST Unprotected Rotor Thermal Plastic TK3S 316 SS vs. Competitor ‘A’ 24-0564 © Icon Process Controls Ltd.

  • Page 4: Technical Specifications

    -40°F to 300°F -40°C to 148°C Outputs NPN Pulse 1 Amp Relay Display Flow Rate Standards and Approvals RoHS Compliant *Optional See Temperature and Pressure Graphs for more information ** ¼” - ⅜” SS Only 24-0564 © Icon Process Controls Ltd.

  • Page 5: Exploded View

    0V (-) Brown + 10~30VDC Black Load Flow Black Flow Rate Pulse Output (NPN) Blue -VDC Meter Grey White Black Flow Rate Pulse Output (OP1) 1 AMP Output White White Grey Circuit Blue Grey 24-0564 © Icon Process Controls Ltd.
  • Page 6 [SV - d] — ▶ Relay OFF: CV > [SV + Hys] or CV < [SV - d] — ▶ Relay ON ▶ d = Hysteresis — Acts like a buffer ± around Alarm Set Point CV: Current Value (Flow Rate) | SV = Set Value 24-0564 © Icon Process Controls Ltd.

  • Page 7: Min/Max Flow Rates

    1850 DN80 (3”) 90.0 24.0 2800 ⚠ K-Factor is Pre-Programmed DN100 (4”) 125.0 33.0 4350 1149 K-Factors for TK Series (V2) Size K-Factor ½” 127.6 ¾” 81.8 1” 55.1 1½” 18.8 2” 10.2 2½” 24-0564 © Icon Process Controls Ltd.

  • Page 8: Model Selection

    ¼” TK3S-08-SS ▶ Flange ANSI 150lb - Consult Factory ▶ FFKM | Kalrez Seals ® ⅜” TK3S-10-SS ½” TK3S-15-SS ¾” TK3S-20-SS 1” TK3S-25-SS 1 ½” TK3S-40-SS 2” TK3S-50-SS 3” TK3S-80-SS 4” TK3S-100-SS 316SS PVDF 24-0564 © Icon Process Controls Ltd.
  • Page 9 Using an allen key loosen the 2 screws Pull the Screws | Do Not Remove! located on either side of the display. Lift the Display. Tighten Allen Screws | Snug Tight Rotate Display 90°. Lower Display. Do Not Over-Tighten! 24-0564 © Icon Process Controls Ltd.
  • Page 10 fibers - max 10% Particle Size - Not to Exceed .5mm Cross Section or Length. Please do not flush the pipe after the Flow Meter is installed with Compressed Air this may damage the ceramic shaft and will Void Warranty. 24-0564 © Icon Process Controls Ltd.
  • Page 11 Icon Process Controls Ltd for a period of one year from the date of sale of such products. Icon Process Controls Ltd obligation under this warranty is solely...

This manual is also suitable for:

Truflo tk3s series