Features - Transition Networks SGPAT10 05 Series User Manual

Transition Networks

Features

•
Wall mount, DIN Rail, or table top installation
•
External AC/DC power supply included with country-specific power cord
•
2-port 10/100/1000 copper to fiber media conversion with 802.3at PoE+ on the copper port
•
Supports full 30 watts of power to each twisted pair port
•
Various fiber versions available supporting fixed SC, fixed LC, and open SFP slots
•
3-port version offers (1) RJ-45 PoE+ port and (2) open SFP slots, device can be configured as a 3-port
switch or as a 2-port media converter with redundant fiber links
•
4-port version offers (2) RJ-45 PoE+ ports and (2) open SFP slots, device can be configured as a 4-port
switch (with or without redundant fiber) or as two independent PoE+ media converters
•
SFP slots can support 100Base-FX, 1000Base-X, or SGMII based (MSA compliant) SFP modules
•
Supports Auto-Negotiation, AutoCross, and Active Link Pass Through (ALPT), Auto Power Reset (APR)
integrated with ALPT, and Auto Link Restore
•
Jumbo frame support
•
LED indicators for power status; per port link, duplex, and activity status; and PoE status
•
Twisted pair ports support IEEE 802.3az Energy Efficient Ethernet for power saving
•
DIP switch control of basic feature configuration
•
Command Line Interface (CLI) control of advanced configuration via RJ-45 serial port
•
SFP Auto Speed Sensing (in 100/1000 mode) for each port
•
Selectable SGMII mode for each fiber port
•
Multiport SGPAT versions provide 3-port or 4-port switch mode or provide redundant fiber links with a
switchover (failover) time of less than 50 milliseconds
•
Revertive or Non-Revertive when in Redundant fiber mode
•
Switch mode or 2-Converter mode
•
Data speeds: TP @ 10/100/1000Mbs; SFP @100FX/1000X/SGMII; Fixed optic @ 1000X.
•
10/100/1000BaseT Twisted Pair Port: RJ45Connector; Automatic MDI/MDI-X selection; CAT5 UTP Cable
specification.
33719 Rev. D https://www.transition.com
SGPAT10xx-x05 PoE+ Converter User Guide
Page 8 of 49