Lowering Header To Field Position - MacDon C Series Unloading And Assembly Instructions

Corn header north america

Hide thumbs Also See for C Series:

ASSEMBLING HEADER

4.3 Lowering Header to Field Position

The headers are shipped upright and will need to be lowered to the ground so that final assembly procedures can be

performed.

1. Ensure that the assembly area is flat and free of rocks or debris that could damage the header. If necessary, move the

header to a more suitable location.

2. Attach a lifting device to the header as described in

4.2 Header Lifting Points, page

22.

3. Use the lifting device and cables to tip the header down into field position.

262362

Revision A

Table of Contents

Do you have a question about the C Series and is the answer not in the manual?

C3006 C3006c C2208 C2208c C3008 C3008c ... Show all