Inspecting Header - MacDon C Series Unloading And Assembly Instructions

3.2 Inspecting Header

Once unloaded, each header must be inspected to ensure that the order was receive in its entirety, correctly, and without
damage.
1. Inspect the following items to ensure that they are present
and correct:
• Serial number (located on plate [A] the left end of the
header, on the top face of the top beam)
• Main driveline guard – ensure it is properly seated to
the gearbox
262362
UNLOADING HEADER
Figure 3.1: Serial Number Plate
Figure 3.2: Main Driveline Guard – Correctly Seated
Figure 3.3: Main Driveline Guard – Incorrectly Seated
12
A
Revision A