Rotenso AKC SAVA X User Manual page 135

12.3. Humidity setting function (some models)
1. When the indoor unit sending wire controller has dual control function of
temperature and humidity, in dehumidication mode, press the function key to
select the RH icon, press the conrm key to enter the humidity control mode, the RH
icon ashes, press the up and down keys to adjust the humidity, the setting range is
OFF->35%~85%, adjusted with 5% humidity. Exit humidity adjustment state after 5
seconds of inactivity.
2. After entering the humidity control mode, press the up and down keys to adjust the
set temperature and display the set temperature for 5 seconds, and then restore the
set humidity display.
3. After switching the mode, exit the humidity control mode.
12.4. GEAR function (some models)
When the indoor unit sending wire controller has the GEAR function, in the boot
cooling mode, press the function key to select the GEAR icon, press the conrm
key to enter the GEAR control mode, and rst display the current GEAR status.
50%->75%->OFF can be switched by the up and down keys within 5 seconds. After 5
seconds, the set temperature will be displayed, press the up and down keys to adjust
the set temperature.
Turn o , switch to mode or turn on sleep, ECO, strong, self-cleaning functions to cancel
the GEAR function.
Wired controller - SAVA X
Installation and Owner's Manual
EN
OPERATION
39