Rotenso AKC SAVA X User Manual page 159

Two - line controller address selection.
Restore factory Settings.
When the air conditioning unit is o, into the query function of
temperature, press "^" or "v" to select Adr, the temperature zone
will display -- or A, B. Where -- refers to the code setting of the
wirecontroller. Press "Con rm" into setting state, press "^" or "v" to
select, then press "Con rm" to complete it.
-- : The code setting
: The wire controller address setting.
When the air conditioning unit is o, into the query function of
temperature, press "^" or "v" to select INIt, the temperature zone
displayed --. Press "Con rm" into setting state, press "^" or "v" to
select to „ON" , then press "Con rm" to complete it.
: Restore factory Settings.
Wired controller - SAVA X
QUERIES AND SETTINGS
of the wire controller shall prevail.
Installation and Owner's Manual
EN
63