Related Manuals for Dakota Digital Retrotech RTX-90C-CAM
Summary of Contents for Dakota Digital Retrotech RTX-90C-CAM
- Page 1 RTX-90C-CAM Dakota Digital RTX Instrument Installation For 1990-’92 Chevrolet Camaro Your new RTX-90C-CAM kit includes: RTX Display Switch Universal Sender Pack Buzzer Assembly Installation Manuals 36” Main Harness Control Box Manual # 650850...
- Page 2 Installation 1. Remove the stock gauge cluster from the dash by removing the four screws indicated below. Retain this hardware for reassembly. 2. The original inner gauge panel and rubber dust seal will be reused; remove the six screws that secure the clear lens and the additional three screws on top that retain the inner gauge panel.
- Page 3 5. Mount the RTX display to the vehicle’s dash using the four retained factory screws from step one. 6. Reassemble the dash in reverse order of disassembly using the retained hardware from step one. Refer to the main RTX manual for wiring instructions to complete the system installation. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Need help?
Do you have a question about the Retrotech RTX-90C-CAM and is the answer not in the manual?
Questions and answers