Lexmark CS963 User Manual page 477

Maintain the printer
Note: For more information on SMTP settings, contact your email provider.
4. Apply the changes.
5. Click Setup Email Lists and Alerts, and then configure the settings.
6. Apply the changes.
Generating reports and logs
1. From the control panel, navigate to Settings > Reports.
2. Select the report or log that you want to print.
◦ Menu Settings Page—Show the current printer preferences, settings, and
configurations.
◦ Device
Device Information—Show the printer serial number, installed solutions, and fax.
Device Statistics—Show supply status, total printed sheets, and printer job
information.
Profiles List—Show a list of profiles or shortcuts that are stored in the printer.
Asset Report—Show the report containing printer asset information, such as serial
number and model name.
◦ Print
Print Fonts—Show the fonts that are available in each printer language.
Print Demo—Show the demo files that are available in the firmware, the flash option,
and the disk option.
Print Directory—Show the resources that are stored on the flash drive, hard disk, or
intelligent storage drive (ISD).
Note: The report appears only when a flash drive, a printer hard disk, or an
ISD is installed.
◦ Network
Network Setup Page—Show the configured network and wireless settings on the
printer.
Note: This report appears only in network printers and printers connected to
print servers.
Wi-Fi Direct Connected Clients—Show the list of devices that are connected to the
printer using Wi-Fi Direct.
Note: This report appears only when Enable Wi-Fi Direct is set to On.
477