Lexmark CS963 User Manual page 162

Set up, install, and configure
CAUTION—POTENTIAL INJURY
To avoid the risk of fire or electrical shock, connect the power cord to an
appropriately rated and properly grounded electrical outlet that is near the
product and easily accessible.
17. Turn on the printer.
Add the tray in the print driver to make it available for print jobs. For more information, see
Adding available options in the print driver on page
Installing the 2000-sheet tandem tray
CAUTION—SHOCK HAZARD
To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after
setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices
attached to the printer, then turn them off as well, and unplug any cables
going into the printer.
Notes
• This option must be installed together with an optional 550‑sheet tray. Placed this
option at the bottom of the configuration.
• If a 550‑sheet tray is already installed, uninstall the tray, remove the tray side cover,
remove the lower tray cover, and then place the tray on top of this option.
• This task requires a flat‑head screwdriver.
1. Turn off the printer.
139.
162