Maintenance; North American Emissions Compliance - Distech Controls ECB-VAVS Installation Manual

Maintenance

Unplug device before any kind of servicing.
The device requires minimal maintenance, but it is important to take
note of the following:
£ If it is necessary to clean the outside of the device, use a dry cloth.
Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive set
out regulations for the recycling and disposal of products. The
WEEE2002/96/EG Directive applies to standalone products, for exam-
ple, products that can function entirely on their own and are not a part
of another system or piece of equipment.
For this reason Distech Controls products are exempt from the WEEE
Directive. Nevertheless, Distech Controls products are marked with the
WEEE symbol , indicating devices are not to be thrown away in mu-
nicipal waste.
Products must be disposed of at the end of their useful life according to
local regulations and the WEEE Directive.

North American Emissions Compliance

United States
Changes or modifications not expressly approved by
Distech Controls could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential and commercial installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
£ Reorient or relocate the receiving antenna.
£ Increase the separation between the equipment and
receiver.
£
Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
£
Consult the dealer or an experienced radio/TV techni-
cian for help.
Canada
This Class (B) digital apparatus meets all the requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (B) respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
12 / 14