Table of Contents
Advertisement
Input Selection (INPUT SELECT)
This performs RGB 2 input selection and sets the SCART jack and VIDEO connector.
Preparation Press the PROCEED button to display the main menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with the desired item
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Adjust with the POSITION/CONTROL
3
buttons
GRGB 2
Selects the signal connected to the RGB 2/DVD/HD IN con-
nector.
[RGB]
: Set at time of RGB signal input
[DVD/HD] : Set at time of DVD/HD signal input
GSCART
[OFF]
: Set so that the SCART jack is not connected
[ON]
: Set to connect the SCART jack
* The SCART jack is not used in the United States. Normally
select [OFF].
If you select [ON], images will not be correctly displayed.
GVIDEO
Select the connector that is assigned to the VIDEO input.
[BNC]
: The setting is to the VIDEO IN connector.
[S-VIDEO] : The setting is to the S-VIDEO IN connector.
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
INPUT SELECT
RGB2
: RGB
SCART
: OFF
VIDEO
: BNC
INPUT SELECT
RGB2
: RGB
SCART
: OFF
VIDEO
: BNC
33
P
M
LASMA
ONITOR
†
Advertisement
Table of Contents
