Atdec AWM-A46HT Installation Manual page 4

7. (OPTIONAL) Adjust rotation tension
7.1 Adjust the rotation tension using 4mm hex key.
Adjustment may only be required for ultrawide monitors.
DRIFTS
8. (OPTIONAL) Adjust rotation tension
8.1 Arm movement can be adjusted
to be firmer or more free. Use the
4mm hex key to adjust the tension
of the pivot joints on the arm.
9. Cable management
9.1 Plug cables into the monitor
and route the cables down the arm
using the cable hooks and clips.
Push cables into hook flaps
10. Removing monitor
10.1 Slide release switch up and
click into unlocked position, then
lift monitor away from the arm.
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20240527
HOLDS POSITION
LOOSEN
TIGHTEN
DO NOT OVERTIGHTEN
Increasing tension only
stiffens movement and cannot
lock off arm movement.
Ensure enough
cable slack is
given to allow
for movement
of the monitor
AWM-A46HT Page 4 of 4