NEC RS232 PLASMA CONTROL CODES COMMERCIAL MODELS Manual page 58

*1: "Master" means the 1st set of PDP at the time of cable connection at
the time of AUTO ID execution.
60.VIDEO WALL SETTING
Function
External control apparatus sets 4screens or 9screens as a video wall.
Transmission Data
DFH 80H 60H F3H 03H DATA00 DATA01 DATA02 CKS
DATA00:
DATA 01:
DATA 02:
*: This command is used to following system.
1. The system configuration is video wall system (4screens or 9screens).
Then please connect each PDP by wired cable.
In the case of 16 screens or 25 screens video wall system, please refer to
No.56."MULTI MODE Select".
2. The ID number from a master
DATA00: Specify the composition of a multi-system.
DATA01: Set master's ID
*1: "Master" means the 1st set of PDP at the time of cable connection at
the time of AUTO ID execution.
01H:1 screen
(Matrix diplay function does not work.)
04H:4 screens (2*2 video wall)
09H:9 screens (3*3 video wall)
00H-FFH:Master's ID
01H : Video1
02H : Video2
03H : Video3
04H : HD (HD1 or DTV or DTV1)
05H : HD2 (DTV2)
06H : HD3 (DTV3)
07H : RGB1 / PC1
08H : RGB2 / PC2
09H : RGB3 / PC3
display is set the continuous number.
1
.
*1
58
*1