Keysight E4981B User Manual page 201

Error Messages
Error Messages (Alphabetical Order)
Query DEADLOCKED
-430
This indicates the status that causes a "DEADLOCKED" Query error. (Refer to
IEEE488.2,6.3.1.7.) This error occurs, for example, when both input and output
buffers become full and the E4981B cannot continue processing.
-440 Query UNTERMINATED after indefinite response
In a certain program message, a Query that requests an ambiguous response
has not yet been completely executed when a different Query is received.
(Refer to IEEE488.2,6.5.7.5.7.)
R
16 Reference Measurement Aborted
This error occurs when REF data measurement is aborted.
48 REF measurement incomplete
This error occurs when the cable correction REF measurement is incomplete.
S
82 Store failed
This error occurs when external mass storage device fails or internal FLASH
ROM hardware fails.
Contact Keysight Technology's Sales and Service Office or the company from
which you purchased the device.
-102 Syntax error
There is a command or data type that cannot be recognized. For example, in
the program message ":SYST:PRES", a colon (:) is inserted by mistake to give
":SYST::PRES".
-134 Suffix too long
The length of suffix is long.
-138 Suffix not allowed
A suffix is added to a numeric value element that does not permit a suffix.
-150 String data error
An error not included in the error numbers between -151 and -159 has
occurred during the syntax analysis of a string data element.
String data not allowed
-158
A string data element has been received where the E4981B does not accept
any string data element. For example, a parameter must be enclosed with
double quotation marks ("...") but they are missing.
Keysight E4981B 120 Hz/1 kHz/1 MHz Capacitance Meter 201