Keysight E4981B User Manual page 11

Keysight E4981B 120 Hz/1 kHz/1 MHz Capacitance Meter
User's Guide
1 Unpacking and Preparation
This chapter describes how to set up and start the Keysight E4981B
Capacitance Meter.
Contents of this Chapter
•
•
•
•
•
"Checking the Shipment" on page 12
After you receive the E4981B, check all the items in the packing
container.
"Environmental Requirements" on page 13
Describes the system requirements needed to install the E4981B and
how to secure space for heat radiation.
"How to Remove the Handle" on page 15
Shows how to attach and remove the handle.
"Preparations Before Use" on page 19
Shows how to check the power supply as well as check and connect
the power cable. This section also describes how to deal with a blown
fuse.
"Starting the E4981B" on page 21
Describes how to turn on/off the power switch and cut off the power
supply.