Table of Contents
Advertisement
With its build-in Web-based Management, managing and configuring
the Modular Switch becomes easier. From cabinet management to
port-level control and monitoring, you can visually configure and
manage your network via Web Browser. Just click your mouse
instead of typing cryptic command strings. However, the Modular
Switch can also be managed via Telnet, Console, or third-party
SNMP Management.
Key Features
Conforms to IEEE 802.3, 802.3u, 802.3z, 802.3ab and
802.3x standards
4 expansion slots to configure flexible network
One built-in intelligent module with RS-232 console
port ( front side )
Supports Half-duplex mode for backpressure, and
full-duplex for flow-control
Store-and-Forward switching architecture for abnormal
packet filtering
Up to 10.4Gbps Back-plane forwarding rate
4K entry MAC address table per Intelligent switch
Module
128Kbyts for 8 ports 10/100TX module, 4 Mbytes for
100FX Fiber module, 128Bytes for Gigabit module
LED
System Power, Diagnostic
8 ports TX module: 10/100Mbps,Link/Active,
Full-duplex/Collision;
2/4/8 ports Fiber module: Link/Active,
Full-duplex/Collision
Gigabit Module: Link, Active, Full-duplex, Collision
Optional different modules including
Gigabit module ( SX/LX ), Gigabit 1000Base-T, 8-port
auto-sensing 10/100Base-TX switch module, 2/4-port
100BaseFX ( ST/SC/MT-RJ/VF-45 ) fiber module, 8-port
100BaseFX ( MT-RJ/VF-45 ) fiber module
7
Advertisement
Table of Contents
