Table of Contents
Advertisement
B. Remove adhesive backing from your Rubber Feet.
C. Apply the Rubber Feet to each corner on the bottom of the Switch.
These footpads can prevent the Switch from shock/vibration.
Figure 4-1. Attaching Rubber Feet to each corner
Rack Mounting
The Modular Switch come with a rack-mounted kid and can be
mounted in an EIA standard size, 19-inch Rack. The Switch can be
placed in a wiring closet with other equipment.
Perform the following steps to rack mount the switch:
A. Position one bracket to align with the holes on one side of the
switch and secure it with the bracket screws. Then attach the
remaining bracket to the other side of the Switch.
on the bottom of the Switch
22
Advertisement
Table of Contents
