Table of Contents
Advertisement
Physical Description
The physical dimensions of the HomePNA 312M are:
The Modular Switch is a modular unit, and its chassis contains four
slots. All optional models come with the built-in CPU modules. The
LEDs are located on the front panel of the Switch to allow you to
monitor the operation and performance at a glance. All ports can be
used for network configuration. The RS-232 port is used for
Out-of-Band Management.
Front & Rear Panel
The front panel of Modular Switch displayed in Figure 1-1 is shown
with 8-port 10/100Base-TX Module, 4-port 100Base-FX Fiber
Module and Gigabit 1000Base-T and Gigabit SX Fiber Module.
Figure 2-1. Front Panel
The 3-pronged power plug and On/off switched are located at the
Rear Panel of the Modular Switch displayed in Figure 2-2. The
Switch will work with AC in the range 100-240VAC, 50-60Hz.
Figure 2-2.
Rear Pane
440mmx 227mm x 67mm ( Lx Wx H )
11
Advertisement
Table of Contents
