Table of Contents
Advertisement
Figure 3-2. Departmental Bridge Application
NOTE: Full-duplex operation only applies to point-to-point access
(for example, when attaching the switch to a workstation, server, or
another switch). When connecting to hubs, use a standard cascaded
connection set for half-duplex operation.
IEEE 802.1Q VLAN Application
The switch support up to 4095 port-based 802.1Q-compatible virtual
LANs (VLANs).
Port-based VLAN Workgroup
You can group the switch ports into broadcast domains by assigning
them to the same VLAN to increase network capacity and
performance. With network segmentation, each switch port connects
18
Advertisement
Table of Contents
