Table of Contents
Advertisement
parameter settings, press Enter on your keyboard and the Main
Menu appears.
Figure 4-6. The Main Menu
Assigning IP Address
After you have attached a terminal or PC with emulation software
and you are ready to make a connection using a web browser. You
have to firstly assign IP information to the switch. It allows you to
manage the switch once it has an IP address.
Once you have logged into the switch, you need to assign an IP
address to the switch's Ethernet interfaces so that you can connect
to the switch using a web browser.
Select Device settings from the main menu. It prompts you for
System Name, System location, System Contact, IP address,
subnet mask, and default gateway, etc. You should have information
ready before you log into the switch and record them here:
26
Advertisement
Table of Contents
