Table of Contents
Advertisement
Press the "Apply" button
You should reboot system to let your settings take effect if you have
changed one of the IP address, subnet mask and default gateway.
Figure 5-16 The IP Config page
SNMP
To set system name, system location and system contact, you can
type the desired text string in the corresponding edit box.
To set the "get request" and "set request" community name, you can
type the desired text string in the corresponding edit box. The default
value of get request community is public. The default value of set
request community is private. You must set these two parameters
correctly to perform "get request" from the management unit and
"set request" to the management unit.
52
Advertisement
Table of Contents
