Warnings - Cortexa Technology DermaLab Mini Instructions For Use Manual

1 Warnings

•
If the unit is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
•
The unit is intended for indoor laboratory use only, at an altitude of less than 3048 m (10,000
feet) above sea level, within a temperature range of 10˚C to 35˚C and a relative humidity
range of 10% to 90% non-condensing. If the instrument is stored outside these ranges, it
should be left to stand until it equilibrates to within the above limits.
•
Keep the calibrator for the skin color probe out of direct sunlight. When not in use, the lid
should be on to avoid degradation of the working standards by UV-radiation.
•
Do not use the device if it shows visible signs of damage or there are other reasons to
believe that the device is not functioning correctly.
•
When measuring with the skin color probe on skin where gels, lotions or ointments have
been applied, make sure that excess material does not enter the measurement head. For-
eign objects that enter the measurement head can be difficult to remove and may impair
the performance of the probe.
•
Avoid exposure to water. If exposed to smaller amounts such as rain, allow for the device
to completely dry and consider contacting Cortex support for aid in assessing if the expo-
sure has affected the integrity of the device.
•
Do not disassemble the device. There are no user accessible or serviceable parts inside
the unit.
•
The performance of this product may be affected if it is stored or transported outside the
range -10°C to 50°C (14°F to 122°F).
•
The performance of this product may be affected if it is being used outside the range
10°C to 35°C (50°F to 95°F).
•
The DermaLab
tion. If the DermaLab
data with other systems, the device may be subject to computer virus attacks potentially
harmful to the software environment and recorded data. To reduce such risk, the installa-
tion of proper virus scanner software is recommended.
•
The device shall only be powered using the power adaptor supplied with the device
(Adapter Tech., ATM036T-P120). Do not use the power adaptor if it has been damaged.
•
Before using any cleaning or decontamination method except those recommended by the
manufacturer, users should check with the manufacturer that the proposed method will
not damage the device.
®
Mini system does not require an internet connection for normal opera-
®
Mini system is networked to other computer systems or exchange
CORTEX TECHNOLOGY ApS
6/66