Measurement List Functions; Measurement List - Cortexa Technology DermaLab Mini Instructions For Use Manual

CORTEX TECHNOLOGY ApS

10.5.3.7 Measurement list functions

The measurement list function panel includes information regard-
ing the total number of measurements as well as the total number
of selected measurements in the measurements list.
By default, all new measurements will be named "Measure X"
where X represents the total number of measurements with that
naming scheme. However, this can be changed by overwriting the
"Measure" listed in the measurement list functions with a new
naming scheme. Numbering will reset from 1 when using a new
naming scheme but will continue from the highest number if nam-
ing scheme matches any measurements in the current list.
Functions in this panel include selecting every measurement in
the measurement list, clearing current selection, and deleting
Measurement List functions
measurements.
Pressing the "Delete data" button will prompt the user to select what measurements to delete
(everything, only selected measurements, or everything but selected measurements).

10.5.3.7.1 Measurement list

The measurement list panel offers a quick overview of every measurement performed as shown
in the following figure. Much like the information in the single measurement data panel described
in 10.5.3.3. this view can be changed from settings to only display data currently being measured
by a probe. This setting is described in section 10.5.4. Besides measurement data, the date and
time of the measurement is also available in this list. On the right side of the list, individual meas-
urements can be removed by pressing the trash can icon.
Measurement list
Selected items in the list will be highlighted and a checkmark will appear in the left side of the list
for each selected measurement as seen in the following figure.
Measurement list with selected measurements
40/66