Advertisement
10.5.2.3 Print
The Print button allows for printing of collected data. Pressing the print button will
open a pop-up with options for printing. Printing options will be displayed based on
currently installed printers on the system including options for printing directly to pdf.
A maximum of 75 measurements can be printed this way at a time. A pop-up will warn
the user if the number is exceeded. There is no max for how many measurements
can be saved to a .cmf file.
10.5.2.4 Clear Data
The "Clear all data" button will remove all collected data from both views.
10.5.2.5 Calibrate
The Calibrate button will initiate calibration
of the probe. An example of the calibration
process can be seen in the figure to the
right. At any point, calibration can be can-
celed by pressing the Cancel button. Press-
ing cancel will discard any steps performed during cur-
rent calibration and revert the probe to use calibration
values from latest completed calibration. If a Calibration
of the probe is due, the user will be informed and the
Calibrate icon will change to orange until a calibration
has been performed.
10.5.2.6 Settings
The Settings button will open the settings menu on the right side of the user-inter-
face.
10.5.2.7 Bottom Menu
This section will cover the Bottom Menu layout. Items have been numbered in the figure below
and will be explained in the following text.
10.5.2.8 Change view
1: The view type of the "Data View" can be changed here. The current view will be highlighted
with a white background.
Bottom Menu numbered for reference
CORTEX TECHNOLOGY ApS
Example of calibration step
35/66
Advertisement
Need help?
Do you have a question about the DermaLab Mini and is the answer not in the manual?