The Dermascope Probe; Maintenance - Cortexa Technology DermaLab Mini Instructions For Use Manual

Non-polarized (surface reflections – typically fine lines - are visible).

14.2 The Dermascope Probe

When using the probe bring the image in focus at one of the two focus areas by turning the black
dial on the side of the camera. Once the image is in focus at the desired magnification, press
Freeze Image to capture the image on the screen. The captured image can then be saved.
Press Unfreeze to start updating the image on the screen again.

14.3 Maintenance

Except for keeping the probe clean, there is no preventive maintenance associated with the use of
the Dermascope probe.
CORTEX TECHNOLOGY ApS
52/66