Introduction To The Skinlab Screens - Cortexa Technology DermaLab Mini Instructions For Use Manual

CORTEX TECHNOLOGY ApS

5 Introduction to the SkinLab Screens

All individual measurement screens use common control buttons located at the lower left side of
the screens. Note: Not all buttons are shown on all screens.
These buttons provide the following functions:
Open: Open (load) measurement data from a file. Only previously stored data for the specific skin
parameter are loaded, other skin parameters remain unchanged. See6.2. for specifics on opening
ultrasound images.
Save: Save measurement data for a specific parameter to a file. See 6.2. for specifics on saving
ultrasound images.
Print: Print measurement data on the default printer.
Clear all results: Delete all measurements on screen for the specific skin parameter. Other skin
parameters remain unchanged.
Reset naming: Resets all measurement names.
10/66