The Sebum Screen And Measurement Procedure; Maintenance - Cortexa Technology DermaLab Mini Instructions For Use Manual

9.4 The Sebum screen and measurement procedure

To perform a sebum measurement, proceed as follows:
1) Pick up an unused sebum collecting strip and insert it into the Tape Reader slot with the
sebum collecting tape and the text side facing down. The device automatically detects the
presence of the strip and performs an offset calibration before it prompts the user to per-
form the next step.
2) Remove the strip and place it on the skin. Apply firm pressure and make sure that the en-
tire sensitive area is in contact with the skin by "rolling" a finger over the back side of the
sensitive area for a few seconds.
3) Re-insert the exposed end of the strip into the reader and wait for the reading to automati-
cally appear on the screen.
In the text box (A) instructions are given for the next step in the measurement sequence.

9.5 Maintenance

There is no preventive maintenance associated with the use of the Sebum reader.
Sebum screen
CORTEX TECHNOLOGY ApS
A
31/66